Full Set of LEED-EB Documentation Online!!!

Thank God for the good people over at University of California, as they have made an ENTIRE set of LEED-EB documentation available in pdf format for FREE online!!!!!!!!!!!!!!!!!!!!!!!!!!! (<--not enough exclamation points)  The project is their 1111 Franklin Street building, pictured below:

1111 Franklin Street

The Best Building (Documentation) Ever!

The downside is that this was not for the latest version of LEED-EB O&M but rather LEED-EB v 2.0. Not a huge deal though, especially for those working on your first projects. RealLifeLEED was hoping to be the first to post a full set of documentation online, but will have to settle for posting the BEST set at a later date.

Super-special thanks to Ashley Silvernell of erstad ARCHITECTS (apparently they do a lot of chicken coups?) for the heads up!

NOTE - This page was updated on 02.04.09 to update link changes. Previously this post listed links to each credit individually, but I've decided to make it easy on myself and just send you to their site:

Go here now!

Thanks Keith for the heads up!

I'm going to punch LEED-Online in the face!

I don't know if you've experienced similar issues in the past week or so, but I haven't been able to log into any of my projects, much less edit them, in at least a week. I can sign in (only took 44 seconds on my last attempt), then I click on the project, and then everyone's favorite "Please be patient while we process your request. This may take up to three minutes" box pops up. I especially despise the furiously unhelpful tracking bar that scrolls along the bottom of the box that has no real connection to the amount of time I need to wait for the next page to load.

LEED Hell

that's seven minutes, not seven seconds

After just over seven minutes I get a page telling me that "this page cannot be loaded" or something about a server error that I don't understand.

The last time I was able to do anything was to setup a new project, and the simple act of assigning roles for each credit took over 1 hour and 13 minutes (yes... I timed that too). Any of you experiencing similar problems or should I talk to my IT department?

Hopefully the "significant enhancements to LEED Online" mentioned with the release of the LEED 2009 draft will help to solve some of these issues.

Finally, a big thanks to the fine folks over at www.online-stopwatch.com for their help making this post possible.

Energy Modeling Further Demystified

Building on the previous post on energy modeling, there is another introduction to the process posted over at BuildingGreen called "Understanding the Energy Modeling Process: Simulation Literacy 101". Great read for beginners such as myself.

energymodeler.com

I found out about the above article thanks to Suzanne O'Leary of ThinkDwell--a company that designs homes making the occupants absurdly and a bit creepily happy according to the picture on their homepage. Suzanne has started what is sure to become a very helpful forum on energy modeling issues called EnergyModeler.com. The site is brand new and will need to develop an audience (that's you!) before it really provides a good base of info, but RealLifeLEED supports any and all online communities that could make sustainable design simpler for everyone. Check it out now!

Job o' the Vague Time Period: USGBC Regional Advocacy Consultant

The US Green Building Council is seeking four (4) regional advocacy consultants to assist in coordinating and maximizing the advocacy work of our 78 chapters across the country. The regional advocacy consultants will work at the state, county and local government level to coordinate and assist our chapters in developing and implementing public policy strategies that advance green building practices and market transformation to a sustainable built environment. The four consultants will be selected on expertise, experience, geographic location, and overall ability to achieve the objectives articulated below. Scope of services required includes:

  • Continuing to establish USGBC as the leading authority and primary point of contact on green building; 
  • Enhancing and improving the coordination and organization of USGBC chapter activity within a specified region in their efforts to monitor and influence legislative, regulatory and policy initiatives;
  • Expanding opportunities for chapters to build and strengthen relationships with state and local policymakers including elected officials and key government officials;
  • Acting as a liaison to the national office and local chapters to promote chapter communication and increased collaboration;
  • Initiating briefings for elected officials, other policymaking officials and community leaders on an as-needed basis;
  • Attending and reporting on state and local policy activity representing the USGBC;
  • Providing outreach to the state and local community, stakeholders and USGBC members about Council initiatives and activities.
For more information please contact rlimoges@usgbc.org.  

LEED Specs - Materials, Paperwork, and CYA

I've been doing a lot of thinking about how LEED requirements are incorporated into the building's specs lately, in no small part due to the fact that I had to give a presentation on the subject last week. The result has been an interesting discussion on the 4specs discussion board (skip down to Anne Whitacre's first comment) and a realization that I've been too harsh on MasterSpec's LEED language in their guide specs...

Disclaimer

I know more about LEED than I know about specs, so don't think I'm some expert on this subject (or LEED for that matter). As you'll see in a second, there's a few differing schools of thought about how to arrange LEED requirements in the specs. I strongly encourage you to share what's worked or your concerns by leaving a comment!

Organization

Your project specifications should include language clarifying:

  • Material procurement issues (recycled content, regional materials, etc.)
  • Documentation requirements (LEED-Online credit templates and supporting documents)
  • Required plans and procedures (indoor air quality, construction waste, and erosion and sedimentation control plans)

To me the main issue is how much control does the architect/designer retain and how much is given to the contractor. Do you write erosion sedimentation control, indoor air quality, and construction waste management plans and simply require the contractor to follow what's included, or do you require that they draft, implement, and verify implementation for each plan themselves? Do you specify recycled content levels for each individual material, or do you simply set a 20% recycled content level for the whole project and let the contractor figure it out themselves? Do you give the contractor direct access to LEED-Online, or do you have them send the architect the necessary supporting documentation and let the architect ensure everything is filled out properly?

In a perfect world, we would all be in design-build projects where the team of architect and contractor work together to solve these issues. Unfortunately we still live in a time where design-bid-build construction contracts get in the way of truly integrated project delivery, and without clear boundaries you're setting yourself up for some serious liability problems.

Sustainable Materials Requirements

When it comes to MRc3-7 and EQc4.1-4.4 I like to set individual LEED product requirements in the material sections (MF04 divisions 02-10) instead of setting a blanket credit achievement goal for the total project (MFO4 section 018113) and letting the contractor figure it out on their own. I feel that the architect should be responsible for determining and considering how to earn these points at least as much the contractor. If I design a wood framed structure with little chance for recycled content, how can I require a contractor to achieve 20% recycled content by cost? Also, I've heard from a few people that subcontractors sometimes don't read the division one sections, and having clear performance requirements in the later divisions helps to ensure important elements aren't overlooked.

Assuming a premium for sustainable purchasing, by placing reasonable requirements for each material there's no incentive for the contractor to only reach the minimum content levels required to earn the point. In one project where we set individual requirements, we're earning exemplary performance for regional materials, with a total project rate over 40%. I'm not sure contractors would necessarily maximize sustainable purchasing if they're only required to meet a lower level. Conversely, by setting performance requirements for more materials than is required to earn the point, the architect/specifier may be unnecessarily raising the total cost of the project.

There are a number of people who disagree with me about setting levels for each material. One person with significantly more specification experience than myself claimed that such a strategy "smacks too much of means and methods". I can't say I completely disagree, especially when considering regional materials requirements. The argument is that we're effectively telling the contractor what to buy and where, limiting their ability to construct efficiently. There is also a significant amount of due diligence required by the architect/specifier to ensure that at least three companies can meet whatever requirements are set for public bid projects. If you're not getting paid for that it can be a serious impediment for profitability.

Lucha Libre LEED Spec Fighters

Don't ask why I made this graphic...

Talking to a contractor with significant LEED experience, I've learned that they tend to see both. Recycled content and VOC levels may be listed in individual sections, but a blanket regional materials requirement will be set allowing them to pick and choose the most efficient methods for purchasing. This seems to me to be a very reasonable approach.

Documentation Requirements

It's very important to clearly state what the contractor is required to do regarding additional paperwork and LEED-Online documentation. If you don't you could get half-way through construction expecting things to be loaded online with the contractor refusing to do so because that scope of work wasn't included in the bid. Typically all of this information will be described in 018113-Sustainable Design Requirements.

I prefer to require the contractor to complete the credit templates themselves and load any required supporting documentation on their own. If the architect/LEED consultant asks for the supporting documentation only to fill out the credit templates and LEED-Online information themselves, they're essentially verifying the contractors work... in writing! This seems to be a ridiculous way to submit yourself to unnecessary risk. At the same time, I like to see progress reports on where we stand with the points as construction proceeds, so we frequently will require updates on a regular basis.

Regarding the various management plans required for the contractor to follow, Len Harding, CDT suggests in an article in the Construction Specifier that it's best to dictate as much of the potentially ambiguous requirements as possible to the contractor to prevent them from just throwing unnecessary money into the bid. In general, a construction waste management plan from one project could easily be adapted to another. This shouldn't be an issue for contractors with LEED experience, but you have people who may be bidding on their first LEED project you will want to provide as much information as possible upfront.

Guide Specs and Other Resources

The article I just mentioned from Len Harding is titled "Specifying LEED Under Public Bid Rules" and contains some practical advice for cost control and general structure that I found very helpful.

Specifying LEED Under Public Bid Rules

If you subscribe to ARCOM's MasterSpec they have a page describing the location and comments for all of the LEED related language online. Their language included is quite in-depth, though they provide specs that include all LEED rating system options instead of separate guide specs for LEED-NC, LEED-CS, LEED-CI, etc. I got a bit confused working from the section 018113 word document without having the commentary on screen as well.

Building Green provides FREE guide specs for only four sections of Division 1, but those four sections are packed with a great deal of information, including benchmark recycled content levels for various products based on the EPA's Comprehensive Procurement Guidelines, which is about to be the subject of a new post...